Material Introduction
Recalon® MC nylon, which is produced by the European advanced original production equipment, raw materials and technology, from the caprolactam by base catalysis bulk polymerization, the polymerization forming synchronization is complete. Process mature products with high performance, energy-saving, pollution-free characteristics. Recalon® MC Nylon is recognized as the most widely used and known engineering plastic in the current market. PA6 has the best performance, very tough, even at low temperatures, and high surface hardness, mechanical lower shock, and abrasion resistance. Combined with these characteristics and good insulation, and chemical properties, it has become common-level materials. It’s widely used in a variety of mechanical structures and spare parts. Compared to PA6, PA66 own the higher hardness, rigidity, better resistance to wear and heat deflection temperature. Temperature resistance from -40℃ to 110 ℃.

Recalon® MC Nylon
Standard Sizes, Colors, Grades, Brands, Types
Recalon® MC Nylon sheet
Thickness (mm) Width × Length (mm)
8mm-300mm 500mmX1000mm
Recalon® MC Nylon rod
Diameter (mm) Length (mm)
40mm-500mm 500mm,1000mm, 2000mm,3000mm
Name: Recalon® MC Nylon Polyamide
Colors include: Natural white, black, blue, green, yellow and other colors
Types: Rods, sheets, tubes, profiles

Grades include:
1. Recalon® oil-filled MC Nylon,green
A special formulation of Liquid Lubricant encapsulated during manufacture, provides for true lubrication at the bearing surface. Oil-Filled Nylon is offered for applications where maintenance lubrication is difficult or impossible. As well, nylon specially formulated OIL, limits moisture adsorption, making Oil-Filled Nylon an ideal bearing material for submerged or critical tolerance applications.

2. Recalon® MoS2 filled nylon, grey-black
Recalon® MoS2 NYLON was filled by molybdenum disulfide, it will not affect high impact and fatigue resistance of the unmodified cast nylon while increasing its carrying capacity and wear resistance. It is very widely used to make gears , bearings, star wheels and shaft sleeves.

3. Recalon® high impact Nylon,Natural

4. Recalon® Glass fiber nylon, black

5. Recalon®Antistatic nylon, black
6. Recalon® flame retardant nylon, black

1. Other sizes, colors can be customized.
2. Length, width, diameter and thickness tolerances may vary by manufacturer.
3. Certain grades available in various colors.

  • Advantages:
    High strength and stiffness
    High impact and notch impact strength
    High heat deflection temperature
    Good at dampening
    Good abrasion resistance
    Low coefficient of friction
    Good chemical stability against organic solvents and fuels
    Excellent electrical properties, ease of printing and dyeing
    Food safe, noise reduction

    Poor dimension stability, electrical and mechanical properties may become affected by absorbing moisture or water
    Poor acidproof ability, can’t dye with acid or touch overmuch acid
    Poor lightfastness, poor endurance in pollution

Product Category

Shenzhen Quanda Plastic Co., Ltd.
Add.: 13/F,Baolong Building B, Longguan West Rd.,Longhua District,Shenzhen,China.
Tel.: +86-755-28113160
Fax: +86-755-28018885

Online Service